Screwdriver and Bit Set 100 Piece

100 pc set consists of:

• 6 x slotted: 0.5 x 3.0 x 75 mm, 0.8 x 4.0 x 100 mm, 1.0 x 5.5 x 100 mm, 1.2 x 6.5 x 100 mm, 1.2 x 6.5 x 150 mm, 1.2 x 8.0 x 150 mm
• 6 x philips: PH0 x 75 mm, PH1 x 75 mm, PH1 x 100 mm, PH1 x 150 mm, PH2 x 100 mm, PH2 x 150 mm
• 3 x pozi: PZ0 x 75 mm, PZ1 x 75 mm, PZ2 x 100 mm
• 3 x torx: T20 x 75 mm, T25 x 100 mm, T30 x 100 mm
• 3 x square drive: S0 x 75 mm, S1 x 75 mm, S2 x 100 mm
• 2 x slotted: 0.4 x 2.5 x 50 mm, 0.5 x 3.0 x 50 mm
• 2 x philips: PH00 x 50 mm, PH0 x 50 mm
• 4 x torx: T6 x 50 mm, T7 x 50 mm, T8 x 50 mm, T10 x 50 mm
• 2 pc x offset screwdrivers: PH1 – SL1.0 x 5.0, PH2 – SL1.0 x 6.0
• 6 pc x nut driver bits with hex shaft: 6, 7, 8, 9, 10, 11 mm
• 1 pc x ratchet screwdriver 6.3 mm
• 60 pc x 25 mm bits

SL: 0.5 x 3.0 - 0.5 x 3.0 - 0.8 x 4.0 - 0.8 x 4.0 - 1.0 x 5.0 - 1.0 x 5.0 - 1.0 x 5.0 - 1.0 x 6.0 - 1.0 x 6.0 - 1.0 x 6.0
PH: PH0-PH0-PH1-PH1-PH1- PH2-PH2-PH2-PH3-PH3
SQ: S0-S0-S1-S1-S1-S2-S2-S2-S3-S3
TORX: T7-T8-T9-T10-T15-T20-T25-T27-T30-T40
HEX: H2-H2.5-H3-H3-H4-H4-H5-H5-H5.5-H6
PZ: PZ0-PZ0-PZ1-PZ1-PZ1-PZ2- PZ2-PZ2-PZ3-PZ3

• 2 pc x VDE screwdriver: Slotted: 0.8 x 4,0 x 100 mm, Phillips: PH1 x 80 mm

ATTENTION! Only appropriately trained persons may work on electrical devices and systems.
• VDE screwdrivers are specifically designed for working on electrical devices and systems.
• They are not intended for mechanical jobs. Standard screwdrivers should be used for this purpose.
• Store VDE screwdrivers separately from other tools to protect them from damage.
• Only use the screwdrivers at temperatures between -20 °C and +70 °C.
• The permissible voltage range of the screwdrivers according to EN 60900 is up to 1500V for DC voltage and up to 1000 V for AC voltage.